An Android Wear Watchface that displays the current heart rate.

Your Android Wear device connects directly to your Bluetooth LE heart rate belt.

No mobile device is necessary after installation. The app displays heart rate zones in colors blue, green, yellow, orange, red and darkred.

On you mobile phone you can adjust your personal heart rate zones, sync your data with the hekori cloud and view your heart rate readings of your last workout.

Requirements:

Android Wear Device (e.g. LG G Watch R)

Bluetooth LE heart rate monitor (e.g. Polar H7)

This app is known to work with

LG G Watch R (Android 5.0.2)

Polar H7

Setup:

Long press the watch face to display the setup screen.

The user can choose to keep the display in interactive mode.

Interactive mode and connected Bluetooth LE device consumes the battery by approx. 10% per hour.

In ambient mode (displaying Date and Time) the power consumption is about 2% per hour.

Troubleshooting:

Sometimes, the Bluetooth heart rate monitor is not listed:

1) check that no other device has connected to your BLE heart rate monitor, e.g., your mobile phone.

2) make sure that the contact pads of your heart rate belt are wet and tightly pressed to your chest.

3) there seems to be a bug in the Android Bluetooth LE implementation. After too many reconnection attempts, it can happen that the heart rate belt is not listed anymore. If that happens, rebooting the watch helps.

一个Android Wear表盘，显示当前的心脏速率。

Android Wear设备直接连接到您的蓝牙LE心脏率带。

没有移动设备安装后，是必要的。这个应用程序显示心脏率区在颜色蓝色，绿色，黄色，橙色，红色和darkred。

在你的手机你可以调整你的个人心脏率区，与hekori云同步您的数据并查看上次锻炼你的心脏速率读数。

要求：

Android Wear设备（例如LG G观看R）

蓝牙LE心脏监测仪（例如极地H7）

这个程序是已知的工作

LG G观看R（Android版5.0.2）

极地H7

建立：

长按表盘显示设置屏幕。

用户可以选择保留显示在交互模式。

交互模式和连接的蓝牙设备LE由大约消耗电池。每小时10％。

在环境模式（显示日期和时间）的耗电量为每小时约2％。

故障排除：

有时，蓝牙心脏监测仪未列出：

1）检查没有其他设备已经连接到您的BLE心脏监测仪，例如，您的手机。

2）请确保你的心脏率带的接触面是湿的，并紧紧地压到你的胸部。

3）似乎有在Android蓝牙LE实现中的错误。过多重新连接尝试之后，它可能发生在心脏速率带不再被列出。如果出现这种情况，重新启动手表帮助。