Goob Alarm Clock (Get Out Of Bed Alarm Clock)

Free Alarm clock that can only be switched off when you are really out of bed!

The alarm clock uses the Wifi signal strength to determine your position. You will only be able to switch off your alarm when you are close enough to your WiFi router.

NEW: Android wear watch faces

NEW: Support for Pebble smartwatch

Setup video http://www.youtube.com/watch?v=aE7dH1nlQm0

Like us on facebook: https://www.facebook.com/goobalarmclock

Setup (Get Out Of Bed ) Goob Alarm

1) If you are connected to a Wifi router you will see the current wifi level in the list of your alarms. The range is 0-100 with 100 max strength.

2) Go as close as possible to your wifi router and note the wifi level

3) Setup your alarm by selecting the alarm (short tap on the time) or create a new one by selecting menu - add alarm.

4) Set Dismiss type to 'Run to Wifi' and also select Dismiss Test button. The Dismiss Test button allows you to dismiss at all times ***use dismiss button only to test your setup***.

5) Set the Wifi Strength to the level you were getting close to your wifi router.

6) Set the time + 3 minutes, so you can test and press Done. Enable the alarm by pressing the square next to the wifi level. Press back or home key. Go to your bedroom and wait until the alarm sounds.

7)Unlock your phone and go towards your wifi router, you will see the wifi level changing in the dialog box. When you are close enough you can dismiss the alarm. (In test mode you can dismiss even when the level is not reached)

8)If all works well, deselect 'Dismiss Test button' in the dismiss type settings menu so you can only dismiss the alarm when you are out of bed!

Troubleshooting - Advanced setup – Permissions explained

1) My Wifi router is in my bedroom (or close to it) so my Wifi strength is very high in my bed.

Select 'Run from wifi' in Dismiss type and set the 'Wifi weakness' to a lower level than what you get in your bedroom. When the alarm goes off you have to move away from your Wifi router in order to be able to dismiss the alarm. Combining 'Run to Wifi' and 'Run from wifi' is also possible.

2) When you are tempted to force close the app or switch the phone off while the alarm sounds, you may try the advanced settings to block this (press menu when you see the alarm list).

3) Not connected to a Wifi router.

If you have Wifi networks but are not connected to them you can enter the Wifi SSID and use the signal strength from that network. You do not need to logon to that network, only the signal strength is used!

4) Wifi will be turned on just before the alarm sounds (if it was switched off). This is why the app needs the “CHANGE WI-FI STATE” permission.

5) The app will add an Alarm icon to the home screen if the alarm is set. This is why the app needs the “MODIFY GLOBAL SYSTEM SETTINGS”

6) When a call comes in while the alarm sounds the alarm volume will go down. This is why the app needs the “READ PHONE STATE AND IDENTITY” permission.

7) “FULL INTERNET ACCESS” is needed for the banners (commercials).

You can also wake up with music, using the music alarm feature by selecting a music song.

With Goob Alarm you can select a free digital LCD alarm clock or analog glow in the dark alarm clock.

Goob Alarm is smart, you have to get out of bed to turn off the alarm.

Now with pink and green LCD Android wear watch faces

If you would like to help translate the app in your language please visit:

http://ackuna.com/translate-/goob-alarm-clock-free/

Full license:

http://www.sygel.com/sygelsite/echip/license.html

Goob闹钟（下床闹钟）

免费闹钟只可以关掉，当你真的下床！

闹钟使用的WiFi信号强度，以确定您的位置。你只能当你足够接近你的无线路由器关掉你的闹钟。

新：Android的磨损手表的面孔

新：支持卵石的SmartWatch

安装视频http://www.youtube.com/watch?v=aE7dH1nlQm0

像我们在Facebook：https://www.facebook.com/goobalarmclock

设置（下床中）Goob报警

1）如果你正在连接到WiFi路由器，你会看到你报警的列表中选择当前无线网络的水平。的范围是0-100 100最大强度。

2）进入尽可能靠近你的无​​线路由器，并记下的wifi水平

3）设置通过选择时间报警（短自来水您的报警），或创建一个新的选择菜单 - 添加报警。

4）将辞退类型为'运行到WiFi的“，还可以选择辞退测试按钮。该辞退测试按钮可以让你解雇在任何时候使用***解雇按钮只测试您的设置***。

5）设置了WiFi强度为你越来越接近你的无线路由器的水平。

6）设置时间+ 3分钟，这样你就可以测试，并按完成。按旁边的wifi水平方启用了警钟。按下背部或home键。去你的卧室，等待报警声音。

7）解锁你的手机去对你的无线路由器，你将看到的wifi水平改变在对话框中。当你足够接近，你可以关闭报警。 （在测试模式下，你可以辞退，即使水平没有达到）

8）如果一切运作良好，取消了解雇类型设置菜单中的“辞退测试按钮'所以你只能解雇报警，当你下床！

疑难解答 - 高级设置 - 权限解释

1）我的无线路由器是在我的卧室（或接近），所以我的WiFi强度是非常高的在我的床上。

选择“从无线网络运行”在辞退类型，并设置了“无线上网的弱点”，以一个较低的水平比你在你的卧室得到。当警报响起时，你必须从你的WiFi路由器，以便能够撤销报警搬走。结合“运行到WiFi的'和'从无线网络运行”也是可能的。

2）当你忍不住要强制关闭应用程序或关闭手机，同时报警声音，您可以尝试的高级设置，当你看到报警列表来阻止这一（按菜单）。

3）未连接到WiFi路由器。

如果你有无线上网的网络，但不连接到它们就可以进入无线上网的SSID和使用的信号强度从该网络。你不需要登录到该网络中，只有信号强度被用来！

4）WIFI将被打开刚才报警的声音之前（如果它关闭）。这就是为什么该应用程序所需要的“CHANGE Wi-Fi状态”权限。

5）应用程序将增加一个报警图标到主屏幕，如果闹钟设置。这就是为什么应用程序需要“修改全局系统设置”

6）当有电话打进来，同时发出声音报警的报警音量会下降。这就是为什么应用程序需要“读取手机状态和身份”的权限。

7）“完全的互联网访问”是需要的横幅（广告）。

你也可以用音乐唤醒，用音乐闹铃功能，通过选择一个音乐歌曲。

随着Goob报警，你可以选择一个免费的数字液晶闹钟或模拟在黑暗中发光的闹钟。

Goob报警是聪明的，你必须要下床来关闭闹铃。

现在用粉红色和绿色的Andr​​oid LCD手表戴面孔

如果您愿意帮助翻译在您的语言的应用程序，请访问：

http://ackuna.com/translate-/goob-alarm-clock-free/

证照齐全：

http://www.sygel.com/sygelsite/echip/license.html